Filter
Top Products
2-6
Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide
OL-23421-02
Chapter 2 Installation
Connecting to the Network
Figure 2-5 Connecting the Copper Model to the Network
Step 2
Connect the other end of the cable to the RJ-45 connector of the target device.
Connecting the Fiber Switch Module
Follow these steps to connect the switch module’s fiber model (GRWIC-D-ES-6S) to the network:
Step 1 Connect one end of the cable to one of the six fiber ports on the fiber model Ethernet switch module (see
Figure 2-6).
239015