Filter
Top Products
CHAPTER
1-1
Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide
OL-23421-02
1
Product Overview
This chapter describes the Cisco Connected Grid Ethernet Switch Module Interface Card, hereafter
referred to as the switch module. The switch deployed together with the Cisco 2010 Connected Grid
Router (CGR 2010) offers utilities a rugged networking solution to enable reliable and secure two-way
communication for substation automation.
Note The Cisco CGR 2010 router must be running Cisco IOS Release 15.1(4)M or higher to run the switch
module.
• Switch Models, page 1-1
• Ports, page 1-2
• LEDs, page 1-7
• Router Compact Flash Memory Cards, page 1-9
Switch Models
Table 1-1 Connected Grid Ethernet Switch Module Interface Card Models
Mode Description
GRWIC-D-ES-6S (SFP fiber
model)
4 100 Mb/s SFP (small form-factor pluggable) module slots,
1 Gigabit Ethernet (GE) dual-purpose port (1 10/100/1000BASE-T
port and 1 100/1000 Mb/s SFP module slot), 1 100/1000 M/bs SFP
module slot.
GRWIC-D-ES-2S-8PC
(Copper model)
8 10/100BASE-T ports, 1 GE dual-purpose port
(1 10/100/1000BASE-T port and 1 100/1000 Mb/s SFP module slot),
1 100/1000 Mb/s SFP module slot.
Note The first four 10/100BASE-T ports (FE0/1, FE0/2, FE0/3,
FE0/4) are PoE+
1
ports.
1. PoE+ = Power over Ethernet plus (provides up to 30 W per port).