Filter
Top Products
52
Installing a Replacement Chassis ID Module
1. Remove the new Chassis ID module from the package.
2. Ground yourself appropriately.
3. Remove the old Chassis ID module, if you have not already done so. Refer to “Removing a Chassis
ID Module” on page 50 if a Chassis ID module is still in place.
4. Align the chassis ID module with the slot and push the module completely into the bay.
5. Use the LEDs to verify the status of the module. Refer to “Chassis ID LEDs” on page 74.
The new Chassis ID has been previously serialized with the information that is unique to your
chassis.
6. Reboot the chassis by using the GUI, or by using the reload command.
Example
Topspin-270# reload
System configuration has been modified. Save?
[yes (default)/no/*.cfg] yes
Proceed with reload? [confirm]
Topspin-270#
Connection to host lost.
#