Filter
Top Products
66
Figure 5-1: Front Panel LEDs
System-Wide Status LED
Locating the System-Wide Status LED
The system-wide status LED is located on the front of the chassis, and is visible whether the bezel cover
is on or off. This LED indicates the overall health of all modules in the system.
If you are facing the front of the chassis, the system-wide status LED is found on the top left corner of
the switch.
In addition, a mirror of the system-wide LEDs are positioned on the back of the chassis. Refer to
“Management Interface Module LEDs” on page 71.
Interpreting the System Status LED
Table 5-1: Interpreting the System-Wide LED (see Figure 5-1)
Color State Indication
off No system power or LED failure.
Green solid on System running with no detected errors.
Yellow solid on Failure within the system. Operator attention
required.