Filter
Top Products
8-2
Cisco SFS InfiniBand Host Drivers User Guide for Linux
OL-12309-01
Chapter 8 HCA Utilities and Diagnostics
hca_self_test Utility
Host Driver Initialization ............. PASS
Number of HCA Ports Active ............. 2
Port State of Port #0 on HCA #0 ........ UP 4X
Port State of Port #1 on HCA #0 ........ UP 4X
Error Counter Check on HCA #0 .......... PASS
Kernel Syslog Check .................... PASS
Node GUID .............................. 00:05:ad:00:00:20:08:48
------------------ DONE ---------------------
Table 8-1 lists and describes the fields in the hca_self_test output.
Table 8-1 Fields in hca_self_test Output
Field Description
Number of HCAs Detected Number of HCAs on the host that the test recognizes.
PCI Device Check Confirms that HCA shows up correctly as a PCI device.
Kernel Architecture Kernel architecture on the host.
Host Driver Version Version of the drivers on the host.
Host Driver RPM Check Confirms that the RPMs that are installed are compatible with the host
operating system.
HCA Type of HCA #0 Displays the HCA card type.
HCA Firmware on HCA #0 Firmware version that runs on the HCA.
HCA Firmware Check on
HCA #0
Displays PASS or FAIL.
Host Driver Initialization Confirms that the IPoIB driver is installed correctly.
Number of HCA Ports
Active
Number of enabled ports on the HCA.
Port State of Port #0 on
HCA #0
Displays up or down to reflect the status of the port.
Port State of Port #1 on
HCA #0
Displays up or down to reflect the status of the port.
Error Counter Check Displays PASS or FAIL.
Kernel Syslog Check Displays PASS or FAIL.
Node GUID IB node GUID.