Filter
Top Products
2-3
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x
OL-13418-01
Chapter 2 Installing Web Conferencing
Preinstallation Tasks: Web Conferencing
Note Check System Requirements for Cisco Unified MeetingPlace at
http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html for the
required service pack.
Gathering Web Conferencing Installation Values
Gather and record the information in Table 2-1 to prepare for your installation of Cisco Unified
MeetingPlace Web Conferencing.
Ta b l e 2-1 Installation Values for Cisco Unified MeetingPlace Web Conferencing
Parameter Description and Value
Hostname of MeetingPlace
Server
This parameter refers to the Cisco Unified MeetingPlace Audio Server system hostname.
If you are installing multiple web servers that share a database and point to the same Audio
Server system, make sure that the Audio Server hostname on all of these web servers
match.
Note If a connection exists between the web server and the Audio Server system—that
is, if there is no firewall between them, port
5003 is not blocked, and the Audio
Server system is up and running—then you can use an IP address instead of a
hostname. However, using an IP address prevents you from taking advantage of the
Audio Server system’s reverse connection feature, which allows the Audio Server
system to initiate a connection to the web server when port
5003 is blocked
inbound.
Hostname:
IP address:
Notes:
Location of web server • Internal (Full Access)—Cisco Unified MeetingPlace Web Conferencing is installed
with all features enabled, and this server is placed inside your corporate network. In
Segmented Meeting Access-2 Server (SMA-2S) deployments, this server functions as
the internal web server.
• External (Limited Access)—Cisco Unified MeetingPlace Web Conferencing is
installed with attend-only capability. In SMA-2S deployments, this server is placed
outside your corporate firewall in an Internet-accessible network, such as a DMZ, and
functions as the external web server.
(For more information on SMA configurations, see the “Installing Web Conferencing for
a Segmented Meeting Access Configuration” chapter.)
Web server location:
Notes: