Filter
Top Products
CLEANING AND PREVENTIVE MAINTENANCE
Copyright © 2006, Cognitive - 1.800.525.2785 117
105-169-03
6. Remove the media guide gear and set aside. Then, unscrew the two screws
exposed after the guides were removed.
7. Locate the screw near behind the head down switch on the right side of the
mechanism. Remove that screw.
8. Spread the enclosure apart slightly. Then, lift the enclosure back and up,
away from the rest of the printer. To access the base portion of the enclosure,
refer to the Mechanism Repair and GMC Repair portions of the repair guide.
Remove both the mechanism and GMC to access the base enclosure.