Filter
Top Products
Copyright © 2006, Cognitive - 1.800.525.2785 51
105-169-03
Performing the Self Test
The self test checks the printer’s overall operability, and lists the printer’s current
settings. Refer to the figures and instructions below to perform the printer self test.
Figure 2-62. Performing the Printer Self Test
IMPORTANT! The printer should be loaded with media, connected to AC power, and turned on.
1) Press and hold the FEED button.
2) Turn the printer ON while holding the FEED button.
3) Release the FEED button when the self test starts to print.
4) Turn the printer off and then on again to return to normal printing operation.
IMPORTANT! AFTER PERFORMING THE SELF TEST, THE PRINTER IS IN HEXADECIMAL
DUMP MODE AND CANNOT PRINT NORMALLY UNTIL THE POWER IS CYCLED (TURNED
OFF, THEN TURNED ON AGAIN).