Filter
Top Products
CLEANING AND PREVENTIVE MAINTENANCE
Copyright © 2006, Cognitive - 1.800.525.2785 121
105-169-03
6. Ensure that the enclosure on-off switch tab is above the on-off switch as
shown. That will help properly locate the enclosure on the base. Check the fit
of the enclosure to the base. The User Interface Cover should rotate freely.
That indicates proper location of the enclosure.
7. Install and torque the two screws shown at right. Torque to 2.5 in.-lbs.
8. Install and torque the mechanism screw located on the right side of the
mechanism, behind the head down switch. Torque to 3 in.-lbs.