Filter
Top Products
Connection Point CP-2E Home Page
iPAQ Connection Point CP-2E User Guide 4–3
Hardware Version: Displays the hardware version of your Connection
Point CP-2E.
Software Version: Displays the version of the software installed on the
Connection Point CP-2E. This changes whenever you install a software
upgrade.
Current Time: Displays current time based upon timezone.
Time since last boot: Displays the time that has elapsed since the
Connection Point CP-2E was last started.
LAN Status
LAN MAC Address: Displays the Ethernet MAC address of the LAN
interface of the Connection Point CP-2E. A MAC address is expressed in
six 2-digit hexadecimal number pairs.
IP Address: Displays the IP address of the local LAN interface of the
Connection Point CP-2E. This IP address is also used as the LAN
gateway address and DNS server address.
Subnet Mask: Displays the local subnet mask of the LAN interface of the
Connection Point CP-2E. The default subnet mask is 255.255.255.0.
DHCP: Displays the status (enabled or disabled) of the internal DHCP
server.
DHCP Start Address: Displays the first IP address in the DHCP
allocation pool. The internal DHCP server allocates IP addresses to client
computers with the start address as the low end of the address range.
DHCP End Address: Displays the last IP address in the DHCP
allocation pool. The internal DHCP server allocates IP addresses to client
computers with the end address as the high end of the range.