Filter
Top Products
Advanced Setup Icons
iPAQ Connection Point CP-2E User Guide 5–15
Changing DHCP Server Settings
1. Click the DHCP link at the left. The DHCP page is displayed.
2. Type the information you wish to change into the relevant fields.
3. Select IP Lease Time from pulldown list.
4. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
5. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left of the Advanced Setup tab.
Reserved IP Table
The Reserved IP Table allows you to assign a specific IP address to a PC
on your local network based on its MAC address. The DHCP server
assigns the same IP address to the PC every time a new address is
requested by the PC. The main page shows IPs that are mapped to specific
MAC addresses.
You can add reserved IP addresses; however, you must have the MAC
address of each client PC for which you wish reserve an IP address.