Filter
Top Products
5–2 iPAQ Connection Point CP-2E User Guide
Advanced Setup Icons
Note: You should change the administrator's user name and password from the
default setting immediately for security reasons. Make note of the new user
name and password so that you can access the Management Icons of the
Connection Point CP-2E in the future.
1. To change the default user name, type a new user name into the
Administrator Login Name field.
2. To set a password, type the new password once into the
Administrator Login Password field, and again into the Confirm
Password field.
Note: Passwords are case-sensitive. Each time you log in, you must use upper
and lower-case letters exactly as you entered them when you created the
password.
3. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
4. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
Resetting to Factory Default
This procedure restores all factory defaults to the Connection Point
CP-2E. Any configuration changes you have made will be lost.
1. On the Connection Point CP-2E Homepage, click Reset Factory
Defaults. A confirmation dialog box is displayed.