Filter
Top Products
Advanced Setup Icons
iPAQ Connection Point CP-2E User Guide 5–17
3. Type the IP address that you wish to reserve into the IP Address
field. The IP address you specify must be within the pool of valid IPs
available to the integrated DHCP server.
4. Type the MAC address of the PC on the local network for which you
wish to reserve the specified IP address into the MAC Address field.
Refer to Appendix B for a complete discussion of identifying MAC
addresses.
5. If you wish, you can type a brief description into the Comment field.
6. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
7. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
Excluded IP Addresses
You can exclude a specific IP address within the DHCP server leasing
pool from being leased out. This is useful for assigning static IP addresses
to devices on the local network. IP addresses listed in the Excluded IP
Table are not assigned to client devices by the DHCP server.