Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5
Compaq Keyboard/Monitor/Mouse Switch Box User Guide
Writer:
Kristi Wishon
Project:
Installation
Comments:
File Name:
E-ch02.doc
Last Saved On:
9/6/96 3:18 PM
Monitor
Keyboard Mouse
Computer 3
Monitor
Computer 3
Keyboard
Computer 3
Mouse
Power Cord
Connector
Power
Switch
HYDR-004.EPS
Figure 2-5.
Keyboard/Monitor/Mouse Switch Box Connectors
2. Decide which computer is to be connected to port 1. Connect the
computer’s keyboard and mouse to the jacks marked K and M,
respectively, beneath the port labeled One. Connect the computer’s
monitor to the 15-pin VGA connector. Bundle and label the cables for
easy identification.
3. Repeat step 2 for all remaining computers to be connected to the
Keyboard/Monitor/Mouse Switch Box. Bundle the cables to the cable rod
with Velcro cable ties. Then route the cables out the slot in the rack-
mount bracket. Use the plastic cable ties to bundle the cables. See Figure
2-6.
HYDR-009.EPS
Cable Rod
Velcro Ties
Plastic
Cable Ties
Figure 2-6.
Bundling cables with cable ties