Filter
Top Products
Professional Video Distribution Switch Crestron CNX-PVID8x3
38 • Professional Video Distribution Switch: CNX-PVID8x3 Operations Guide - DOC. 8159A
Firmware Upgrade
A firmware upgrade file has the
extension .upg.
To take advantage of all the available features, it is important that the unit contains
the latest firmware. Please check the Crestron website for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the CNX-PVID8x3 firmware, complete the
following steps.
1. Make sure that “Communication Settings” that begins on page 34 has
been performed.
2. As shown after this step, select File Transfer | Update Network
Device Firmware from the Viewport menu.
File Transfer | Update Network Device Firmware Command
3. As shown after this step, select the Net ID of the CNX-PVID8X3 and
then click OK. The “Open” window appears (refer to the subsequent
graphic).
“Select Network ID” Window
NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed.