Datalogic Scanning QD 2300 Barcode Reader User Manual


 
Code 39
Product Reference Guide 119
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains
only a start character, a dash (minus), and a stop character.
- The scanner issues a short high/low/high beep.
- The scanner erases the transmission buffer.
- No transmission occurs.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1. Scan the Transmit Buffer bar code below which contains only a start character, a plus (+),
and a stop character.
- The scanner transmits and clears the buffer.
- The scanner issues a low/high beep.
2. Scan a Code 39 bar code with a leading character other than a space.
- The scanner appends new decode data to buffered data.
- The scanner transmits and clears the buffer.
- The scanner signals that the buffer was transmitted with a low/high beep.
- Scanner transmits and clears the buffer.
NOTE
Because the Clear Buffer contains only the dash (minus) character, set the
Code 39 length to include length 1 before scanning this bar code.
Clear Buffer
NOTE
Because the Transmit Buffer contains only a plus (+) character, set the Code
39 length to include length 1 before scanning this bar code.
Transmit Buffer