Filter
Top Products
Product Reference Guide 1
Chapter 1
Introduction
About this Guide
This manual presents advanced user information which includes connection, program-
ming, maintenance, technical specifications, and other useful references. For additional
user information, see the Quick Reference Guide (QRG). Copies of other publications
for this product are downloadable free of charge from the website listed on the back cover
of this manual.
On leaving the factory, units are generally programmed for the most common terminal
and communications settings. If you need to change these settings, custom program-
ming can be accomplished by scanning the bar codes in this guide.
Manual Overview
Chapter 1, Introduction provides a product overview, unpacking instructions, and cable
connection information.
Chapter 2, Getting Started presents information about unpacking and setting up the
scanner.
Chapter 3, Operation describes parts of the scanner, beeper and LED definitions, and
how to use the scanner in Trigger Single and Stand modes.
Chapter 4, Problem Isolation outlines troubleshooting procedures addressing various
problems.
Chapter 5, General Features includes programming bar codes for selecting common
features for the scanner and general use bar codes to customize how the data is transmit-
ted to the host device.
Chapter 6, RS-232 supplies information about setting up the scanner for RS-232 oper-
ation.
Chapter 7, Keyboard Wedge Interface discusses how to set up the scanner for Keyboard
Wedge operation.
Chapter 8, USB Interface explains how to set up the scanner for USB operation.
Chapter 9, Symbologies defines options for all symbologies and provides the program-
ming bar codes necessary for configuring these features.
Appendix A, Technical Specifications lists physical and performance characteristics, as
well as environmental and regulatory specifications. It also provides standard cable pin-
outs.
Appendix B, Standard Defaults references common factory default settings for scanner
features and options.