Datalogic Scanning QD 2300 Barcode Reader User Manual


 
Code 93
Product Reference Guide 121
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for Code 93 to any length, one or
two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only Code 93 bar codes containing a
selected length. Select the length using the numeric bar codes in Appendix E, Keypad.
For example, to decode only Code 93 bar codes with 14 characters, scan Code 93 - One
Discrete Length, then scan 1 followed by 4. To correct an error or to change the selec-
tion, scan the CANCEL bar code located in Appendix E, Keypad.
Two Discrete Lengths - Select this option to decode only Code 93 bar codes contain-
ing either of two selected lengths. Select lengths using the numeric bar codes in Appen-
dix E, Keypad. For example, to decode only those Code 93 bar codes containing either 2
or 14 characters, select Code 93 - Two Discrete Lengths, then scan 0, 2, 1, and then
4. To correct an error or to change the selection, scan the CANCEL bar code located
in Appendix E, Keypad.
Length Within Range - Select this option to decode a Code 93 bar code with a spe-
cific length range. Select lengths using the numeric bar codes in Appendix E, Key-
pad. For example, to decode Code 93 bar codes containing between 4 and 12
characters, first scan Code 93 - Length Within Range. Then scan 0, 4, 1, and 2 (single
digit numbers must always be preceded by a leading zero). To correct an error or change
the selection, scan the CANCEL bar code located in Appendix E, Keypad.
Any Length - Scan this option to decode Code 93 bar codes containing any number of
characters within the scanner’s capability.