Datamax Allegro 2 Printer User Manual


 
Getting Started
6 Allegro2
Pause Button: This button allows the operator to stop printing a
run of labels and then restart the job by pressing
the button again. Activation of the button will:
Stop the print mechanism when the label
printing is complete.
Turn on the pause light.
Stop the label counter, but maintain the
count balance.
Hold all data in memory.
Pressing the button a second time will:
Restart the Printer.
Print the balance of labels on the counter
unless interrupted.
Turn ‘off’ the pause light.
Pause Light: The pause light will turn on if any of the
following occurs:
The pause button is pressed.
A print job is canceled with the stop/cancel
button.
A fault occurs with the cutter or rewind
option.
Stop/Cancel Button:This button allows the operator to stop and cancel
a run of labels in the process of being printed and
continue on to the next run in the Printer’s buffer.
Feed Button: Pressing this button causes the paper to
automatically advance to the first print position of
the next label. On a new size label, 0 - 2 labels
may feed before registration occurs.