Filter
Top Products
Important Safety Instructions
Your Barcode Printer has been designed to give you many years of
safe, reliable service. As with all electrical equipment, there are a few
basic precautions you should take to avoid getting hurt or damaging
the Printer.
• Carefully read the installation and operating instructions
provided with your Printer.
• Read and follow all warning instruction labels on the Printer
itself.
• Place the Printer on a flat, firm, solid surface.
• To protect your Printer from overheating, make sure all
openings on the Printer are not blocked.
• Do not place the Printer on or near a heat source, (i.e., a radiator
or heat register).
• Do not use your Printer near water, or spill liquid of any kind
into it.
• Be certain that your power source matches the rating listed on
the back of the Printer. If you are unsure, check with your
dealer or with your local power company.
• Do not place the power cord where it will be walked on. If the
power cord becomes damaged or frayed replace it immediately.
• Do not insert anything into the ventilation slots or openings on
the Printer.
• Only qualified, trained service technicians should attempt to
repair your Printer.