Filter
Top Products
Creating Labels Using Internal Batch Software
54 Allegro2
starting number or the prompt information, followed by
the return key, for each consecutive number or prompt.
After this information is entered, the cursor will move
to the Sample Position.
4. In the Sample Position, there are two choices:
a. Print a sample label to check data placement by
pressing the Y key for yes. A sample label will print
and the cursor will return to the Sample Position. At
this point, you can proceed to step b or you can stop
the run by pressing the up arrow key to move the
cursor back to the Label Name position. Press the
F1 key to re-edit your format in the Create/Modify
Label Screen.
b. If you do not need a sample, press the N key or the
return key for no. The number of labels you
requested will be printed. After the print job request
is sent to the Printer, the cursor will move back to
the Label Name Position. Additional print jobs now
can be sent to the Printer or you can return to the
Create/Modify Label Screen.