Filter
Top Products
dCS 974 User Manual Manual for Software Version 1.0x
dCS Ltd May 2001
Manual part no: DOC1241121A1
Page 64
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
Either select one of these or press the Recall button again to toggle between
the user-defined and fixed setups:
Scroll up or down to the required store and press the Enter button. A message
window will appear in the display to confirm that the unit is reading the setup.
When complete, the display shows the Status screen for the current menu.
If you make a mistake during a Store or Recall routine and you have not yet
pressed Enter, you can abort it by pressing any of the 4 Operation buttons.
Locking Out Changes, and Unlocking Again
Once the unit is set up, it may be locked against casual interference by holding
down the Status button and pressing the Store button.
appears on the right hand side of the Status, Error Monitor, Test
Mode, Info, Bit Activity Monitor or Level Meter screen as appropriate and the
front panel controls have no effect.
To restore normal operation, hold down the Status button and press the Edit
button. The
label will disappear and normal operation will be
resumed.