Filter
Top Products
1. From the menu list, use the Arrow buttons to scroll the Paper menu.
2. Press the Select button
.
3. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button
.
4. Use the Arrow buttons to scroll through the available menu items.
5. When the setting you want appears on the display, press the Select button
to save the setting.
*Factory default setting
Rough/Cotton
Recycled
Custom Type <x> (where x represents 1–6)
Paper Loading Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton
Recycled
Custom Type <x> (where x represents 1–6)
Universal
Setup
Units of Measure
Portrait Width
Portrait Height
Feed Direction
Paper Mode Main Menu
From
this
menu:
You can:
Default
Source
Set a default paper source for all print jobs.
Tray <x>*
MP Feeder
Manual Paper
Manual Env
NOTE: The items on the default source varies depending on the device type and
the attachments and/or supplies installed on it. Size and Type settings are
configured for each of the listed Default Source option under Tray Configuration.
Configure
MP
Determine when the printer selects paper from the multipurpose feeder and the
mode of operation of the multipurpose feeder.
Cassette*—Treats the multipurpose feeder like any other tray. If a print job
requests a size or type that is only loaded in the multipurpose feeder, the
printer pulls print media from the multipurpose feeder for the job.