Filter
Top Products
Removing the Camera Module | 101
43
Removing the Camera Module
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 17.
2 Remove the keyboard. See "Removing the Keyboard" on page 21.
3 Remove the palm rest. See "Removing the Palm Rest" on page 27.
4 Remove the battery. See "Removing the Battery" on page 31.
5 Remove the display assembly. See "Removing the Display Assembly" on page 85.
6 Remove the display bezel. See "Removing the Display Bezel" on page 89.
Procedure
1 Peel the camera module from the display cover.
2 Disconnect the camera cable from the connector on the camera module.
3 Lift the camera module off the display cover.
1 camera cable 2 camera module
3 display cover
1
2
3
book.book Page 101 Tuesday, April 17, 2012 11:08 AM