Filter
Top Products
Replacing the Display Hinges | 99
42
Replacing the Display Hinges
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the display hinges with the screw holes on the
display cover.
2 Replace the screws that secure the display hinges to the display cover.
Ensure that the display cable and antenna cables are routed through the slot on the
display hinges.
Postrequisites
1 Replace the display panel. See "Replacing the Display Panel" on page 95.
2 Replace the camera module. See "Replacing the Camera Module" on page 103.
3 Replace the display bezel. See "Replacing the Display Bezel" on page 91.
4 Replace the display assembly. See "Replacing the Display Assembly" on page 87.
5 Replace the battery. See "Replacing the Battery" on page 33.
6 Replace the palm rest. See "Replacing the Palm Rest" on page 29.
7 Replace the keyboard. See "Replacing the Keyboard" on page 25.
8 Replace the base cover. See "Replacing the Base Cover" on page 19.
9 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 99 Tuesday, April 17, 2012 11:08 AM