Filter
Top Products
Replacing the Switch | 15
4
Replacing the Switch
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Align the tabs at the bottom of the switch with the slots on the display cover and
snap the switch into place.
NOTE: Ensure that the tabs on the switch are secured in the slots on the
display cover.
2 Follow the instructions in "After Working Inside Your Computer" on page 11.
1 switch 2 tabs
3slots
3
2
1
book.book Page 15 Tuesday, April 17, 2012 11:08 AM