Filter
Top Products
40 | Removing the Wireless Mini-Card(s)
Procedure
1 Close the display, if it is open, and turn the computer over.
2 Disconnect the antenna cables from the connectors on the Mini-Card(s).
3 Remove the screw that secures the Mini-Card(s) to the connector on the
system board.
4 Lift the Mini-Card(s) out of the system-board connector.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
1 antenna cables (2) 2 Mini-Card
3 screw 4 system-board connector
1
2
3
4
book.book Page 40 Tuesday, April 17, 2012 11:08 AM