Filter
Top Products
64 | Removing the Fan
Procedure
1 Remove the screw that secures the fan to the computer base.
2 Lift the connector latch and pull the pull-tab to disconnect the LED-board cable
from the system-board connector.
3 Peel the LED-board cable from the fan.
4 Disconnect the fan cable from the system-board connector.
5 Lift the fan along with its cable away from the computer base.
1 fan cable 2 screw
3 fan 4 LED-board cable
5 pull-tab 6 connector latch
1
2
3
4
5
6
book.book Page 64 Tuesday, April 17, 2012 11:08 AM