Filter
Top Products
Replacing the Camera Module | 103
44
Replacing the Camera Module
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the connector on the camera module.
2 Use the alignment posts on the display cover to place the camera module in
position and adhere the camera module to the display cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 91.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 87.
3 Replace the battery. See "Replacing the Battery" on page 33.
4 Replace the palm rest. See "Replacing the Palm Rest" on page 29.
5 Replace the keyboard. See "Replacing the Keyboard" on page 25.
6 Replace the base cover. See "Replacing the Base Cover" on page 19.
7 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 103 Tuesday, April 17, 2012 11:08 AM