Filter
Top Products
Replacing the LED Board | 73
30
Replacing the LED Board
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Slide the LED board into the tabs on the computer base.
2 Adhere the LED-board cable on the computer base and fan.
3 Slide the LED-board cable into the system-board connector and press down on the
connector latch to secure the cable.
Postrequisites
1 Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
page 55.
2 Replace the battery. See "Replacing the Battery" on page 33.
3 Replace the palm rest. See "Replacing the Palm Rest" on page 29.
4 Replace the keyboard. See "Replacing the Keyboard" on page 25.
5 Replace the base cover. See "Replacing the Base Cover" on page 19.
6 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 73 Tuesday, April 17, 2012 11:08 AM