Filter
Top Products
Replacing the Keyboard | 25
8
Replacing the Keyboard
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1 Slide the keyboard cable into the system-board connector and press down on the
connector latch to secure the keyboard cable.
2 Slide the tabs at the bottom of the keyboard into the slots on the palm rest and
place the keyboard on the palm rest.
3 Gently press around the edges of the keyboard to secure the keyboard under the
tabs on the palm rest.
4 Close the display and turn the computer over.
5 Replace the screw that secures the keyboard to the computer base.
Postrequisites
Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 25 Tuesday, April 17, 2012 11:08 AM