Filter
Top Products
Removing the Memory Module(s) | 35
13
Removing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 17.
2 Remove the keyboard. See "Removing the Keyboard" on page 21.
3 Remove the palm rest. See "Removing the Palm Rest" on page 27.
4 Remove the battery. See "Removing the Battery" on page 31.
Procedure
CAUTION: To prevent damage to the memory-module connector, do not use
tools to spread the memory-module securing clips.
1 Close the display and turn the computer over.
2 Use your fingertips to carefully spread apart the securing clips on each end of the
memory-module connector until the memory module pops up.
3 Remove the memory module from the memory-module connector.
1 memory-module connector 2 securing clips (2)
3memory module
1
2
3
book.book Page 35 Tuesday, April 17, 2012 11:08 AM