Filter
Top Products
9-12 Dell Precision 610 Mini Tower Systems User’s Guide
Press the Slot 2 SEC cartridge firmly into its connector until it is fully seated.
You must use up to 25 lb of force to fully seat the Slot 2 SEC cartridge in its
connector. Install a second Slot 2 SEC cartridge/heat sink assembly into its con-
nector, if desired. Place the top bracket on top of the Slot 2 SEC cartridge(s) (see
Figure 9-8). Install or replace the four large thumbscrews through the top bracket
holes and through the holes in the guide bracket assembly to secure the heat
sink to the chassis.
top bracket
Slot 2 SEC
cartridge
guide bracket
assembly
thumbscrews (4)
heat sink
top bracket
holes (4)