Filter
Top Products
10-12 Dell Precision 610 Mini Tower Systems User’s Guide
If any hard-disk drives are already installed in the bracket, disconnect the DC
power cable and interface cable from each drive.
Grasp the handle of the drive cage door on the front of the chassis, and pull out
and down until the arms on the drive cage door (see Figure 10-10) disengage
from the tabs on the bracket. This action pulls the bracket out of the drive cage
about 1 to 3 inches.
.
Use the four screw holes in the top and bottom of the bracket (see Figure 10-11)
to secure the installed hard-disk drive(s).
tabs on bracket (2)
drive cage
arms on drive
cage door (2)
drive cage door
drive-cage door
handle