Filter
Top Products
C-2 Dell Precision 610 Mini Tower Systems User’s Guide
No Configuration
Manager.
The device driver needed
by the ICU is corrupted or is
not correctly configured.
Verify that the following device state-
ment appears in your config.sys file:
device=
drive
:\
directory
\driv-
ers\dos\dwcfgmg.sys
In this statement,
drive
and
directory
represent the drive and directory where
the driver resides. The default is
c:\plugplay
.
At least one Plug and
Play card in your system
is not configured due to
conflicts. These are
marked “config err” in
the list of configured
cards.
Due to conflicts, the ICU
could only configure some
Plug and Play cards in
your system. Unconfig-
ured cards are marked
“config err” in the list
of configured cards.
The Configuration Manager
or the ICU cannot configure
at least one Plug and Play
expansion card because of
resource conflicts with one
or more cards.
You must reconfigure the conflicting
card(s). To find the conflicting card, per-
form the following steps:
config err
The Card Configuration dialog box
displays the functions assigned to
the Plug and Play expansion card.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.