Filter
Top Products
Network Basics
Dell 7130cdn Professional Color Printer
User Guide
22
Using the Control Panel
To manually set the IP address:
1. On the control panel, select Printer Setup > Connection Setup > Network Setup >
TCP/IPv4 Setup, then press the OK button.
2. Select DHCP/BOOTP, then press the OK button to select Off.
3. Select IPv4 Address, then press the OK button.
4. Enter the printer’s IP address, then press the OK button.
Changing or Modifying the IP Address Using the Embedded Web Server
The Embedded Web Server provides a simple interface that enables you to manage, configure,
and monitor networked printers from your desktop using an embedded Web server. For complete
information about the Embedded Web Server, click the Help button in the Embedded Web
Server to go to the EWS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using the Embedded Web
Server.
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. Enter or modify the settings, and then click Save Changes at the bottom of the page.
See also:
System Administrator Guide at www.support.dell.com
Default Router/Gateway address Router address is required to communicate with
the host device from anywhere other than the
local network segment.
Information Required for Manual IP Addressing