Filter
Top Products
132 Removing and Installing Parts
7
Press the two spring clamps and slide out the floppy drive along with the
FlexBay drive cage from the FlexBay slot.
8
Remove the two screws holding the floppy drive in the FlexBay drive cage.
9
Lift the floppy drive to separate it from the FlexBay drive cage.
10
Slide the FlexBay drive cage in the FlexBay slot till it snaps in place.
11
Install the FlexBay drive insert (see "Replacing the FlexBay Drive Panel
Insert" on page 136).
12
Replace the optical drive (see "Installing an Optical Drive" on page 141).
13
Replace the bezel (see "Replacing the Bezel" on page 123).
14
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
15
Connect your computer and devices to electrical outlets, and then turn
them on.
16
Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 170).
1 screws (2) 2 FlexBay drive cage
2
1