Filter
Top Products
140 Removing and Installing Parts
Removing an Optical Drive
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3
Remove the bezel (see "Removing the Bezel" on page 122).
4
Disconnect the optical drive data cable from the system board connector.
5
Disconnect the power cable and the optical drive data cable from the back
of the drive.
6
Pull the optical drive bay release lever gently and slide the optical drive out
through the front of the computer.
7
If you are not replacing the drive, replace the drive panel insert (see
"Replacing the FlexBay Drive Panel Insert" on page 136).
1
optical drive bay release lever 2 optical drive
1
2