Filter
Top Products
134 Removing and Installing Parts
8
Tighten the two screws on the other side to secure the floppy drive in the
FlexBay drive cage.
9
Slide the FlexBay drive cage along with the floppy drive in the FlexBay slot
till it snaps in place.
10
Attach the power and data cables to the floppy drive.
11
Connect the other end of the data cable to the connector labeled
"FLOPPY" on the system board (see "System Board Components" on
page 105).
12
Check all cable connections, and fold cables out of the way to avoid
blocking airflow between the fan and cooling vents.
13
Replace the optical drive (see "Installing an Optical Drive" on page 141).
14
Replace the bezel (see "Replacing the Bezel" on page 123).
15
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
1 floppy drive
1