Filter
Top Products
142 Removing and Installing Parts
5
Gently slide the drive into the optical drive bay till it snaps in place.
6
Connect the power and data cables to the drive.
7
Connect the data cable to the system board connector on the system
board.
8
Replace the bezel (see "Replacing the Bezel" on page 123).
9
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
10
Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
11
Enter system setup (see "System Setup" on page 170) and select the
appropriate
Drive
option.
12
Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 84).
1 optical drive
1