Filter
Top Products
Removing and Installing Parts 141
8
Replace the bezel (see "Replacing the Bezel" on page 123).
9
Replace the computer cover (see "Replacing the Computer Cover" on
page 162).
10
Connect your computer and devices to electrical outlets, and then turn
them on.
11
Configure the drives in system setup (see "Entering System Setup" on
page 170).
Installing an Optical Drive
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3
Remove the bezel (see "Removing the Bezel" on page 122).
4
Fit the two shoulder screws into the screw holes towards the front of the
optical drive.
1 shoulder screws (2)
1