Filter
Top Products
Installing System Components 139
VFlash Media (Optional)
The VFlash media card is a Secure Digital (SD) card that plugs into the
optional iDRAC6 Enterprise card at the back corner of the system.
Installing a VFlash Media Card
1
Locate the VFlash media slot at the back corner of the system.
2
With the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.
NOTE: The slot is keyed to ensure correct insertion of the card.
3
Press inward on the card to lock it into the slot.
Removing a VFlash Media Card
To remove the VFlash media, push inward on the card to release it, and pull
the card from the card slot.
Internal Dual SD Module (Optional)
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated
Devices screen of the system setup, the information is replicated from one SD card
to another.
Removing the Internal Dual SD Module
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 89.
3
If applicable, remove the SD card(s). See "Removing an Internal SD Card"
on page 142.
4
Remove the I/O card. See "Removing the I/O Card" on page 134.
book.book Page 139 Wednesday, January 20, 2010 10:20 AM