Filter
Top Products
Removing and Installing Parts: Dell Dimension E520 Service Manual
file:///T|/htdocs/systems/dimE520/en/SM_EN/parts.htm[10/16/2012 1:05:24 PM]
1 floppy drive 2 shoulder screws (4)
5. Gently slide the drive into place until you feel a click or feel the drive securely installed.
6. Attach the power and data cables to the floppy drive.
7. Connect the other end of the data cable to the connector labeled "FLOPPY" on the system board (see System Board
Components) and route the cable through the clip on the processor shroud.
1 power cable 2 data cable 3 processor shroud clip
8. Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
Insert the floppy data cable into the clip on top of the processor shroud.
9. Replace the drive panel (see Installing the Drive Panel
).
10. Replace the computer cover (see Replacing the Computer Cover
).
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.