Dell E6500 Laptop User Manual


 
3. Lift and unsnap the bezel from the left and right sides, and the top and the bottom of the display panel.
4. Once all snaps are released, lift the bezel from the display assembly.
Replacing the Display Bezel
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1. Align the latch hook on the display panel with the small rectangular opening on the display bezel.
2. Starting at any corner, gently snap the bezel into place to secure it to the display panel.
3. Replace the display assembly (see Replacing the Display Assembly).
Removing the Display Panel
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1. Follow the instructions in Before Working on Your Computer.
2. Remove the display assembly (see Removing the Display Assembly).
3. Remove the display bezel (see Removing the Display Bezel).
4. Remove the four M2.5 x 5-mm screws from the display panel.
Removing the CCFL Display Panel
CAUTION: To avoid damage to the bezel and the display screen, exercise care while removing the bezel from the display cover.
CAUTION: To release the snaps on the left and right sides of the bezel, push the bezel sides away or out from the display while lifting the bezel.
To release the snaps along the top and the bottom of the bezel, pull the bezel top or bottom towards or in to the display while lifting the bezel.
Special attention is required for the corners, especially for bezels used with LED display panels.
1
left side of bezel
2
display panel
3
top of bezel
4
right side of bezel
5
bottom of bezel
CAUTION: To engage the snaps on the left and right sides of the bezel, pull the bezel sides towards or in to the display while pushing down on the
bezel. To engage the snaps along the top and bottom of the bezel, push the bezel top or bottom away or out from the display while pushing down
on the bezel.