Filter
Top Products
Replacing the Right-Speaker and Fingerprint Reader Cover
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1. If you have a fingerprint reader, connect the fingerprint reader cable. Press along the cable to seal the cable into the palm rest.
2. Snap the speaker/fingerprint reader cover into place
3. Turn the computer upside down, and tighten the two M2.5 x 5-mm captive screws.
4. Replace the keyboard (see Replacing the Keyboard).
5. Replace the LED cover (see Replacing the LED Cover).
6. Replace the optical drive (see Replacing the Optical Drive).
7. Replace the hard drive (see Replacing the Hard Drive)
8. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: If you are installing a new fingerprint reader/speaker cover assembly, remove the backing paper from the bottom of the cable.