Filter
Top Products
support.dell.com Getting Started 1-11
PowerEdge Cluster FE100/FL100
Datacenter Server Minimum System
Requirements
Dell PowerEdge Cluster FE100/FL100 Datacenter Server configurations require the
following hardware and software components:
• Cluster nodes
• Cluster storage
• Cluster interconnects
• Operating system and system management software
Cluster Nodes
Cluster nodes require the following hardware resources:
• Two to four supported Dell PowerEdge systems, each with at least two
microprocessors.
• For each server, a minimum of 2 GB random access memory (RAM) and two
HBAs.
• For each server, at least one network interface controller (NIC) is required for
client local area network (LAN) connections (public network).
• One NIC required for the cluster interconnect (private network).
Cluster Storage
Cluster storage requires the following:
• For each cluster, at least one supported PowerVault 65xF/630F Fibre Channel
storage system with dual standby power supplies (SPSs).
• For each PowerVault 65xF disk processor enclosure (DPE), at least ten hard-disk
drives are required;
• Each PowerVault 630F disk array enclosure (DAE) attached to the cluster can con-
tain five or ten hard-disk drives in each DAE.
Cluster Interconnect Connections
(Private Network)
The cluster connections for the cluster interconnect (private network that connects
the cluster nodes together) requires the following hardware components:
• For each server, either a Broadcom NetExtreme Gigabit Ethernet NIC or
Giganet cLAN 1000 adapter.
• For each server, one Category 5 (CAT 5) Ethernet cable or Giganet cLAN cable to
connect the nodes.