Filter
Top Products
Figure 39. Removing and installing an expander card
1. screw (3) 2. expander-card cable connector that
connects to the connector on the
system board (J_PERC)
3. expander card cable 4. expander card
5. guide pin (2)
Next steps
1. Install the expander card.
Related Links
Installing an expander card
Removing a server module
Removing the system cover
Removing a hard drive/SSD cage
Removing a 2.5 inch (x4) SATA hard drive/SSD backplane
Removing a 2.5 inch (x4) SAS hard drive/SSD backplane
Removing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing a 1.8 inch (x12) SAS SSD backplane
106