Filter
Top Products
Figure 35. Removing and installing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD
backplane
1. hard drive/SSD backplane 2. release latch (2)
3. guide pin (5) 4. connector on the system board
(SATA_BP)
5. hard-drive/SSD backplane cable
connector
6. connector on the system board
(J_PERC)
7. PCIe SSD backplane cable connector 8. PCIe SSD backplane cable
9. hard-drive/SSD backplane cable
Next steps
1. Install the hard drive/SSD backplane.
Related Links
Installing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing a server module
Removing the system cover
95