Filter
Top Products
Appendix 87
5
Remove the computer cover (see page 78).
6
Locate the battery socket (see page 82).
NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the system
board with the object. Ensure that the object is inserted between the battery and the socket before you
attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or
by breaking circuit traces on the system board.
7
Remove the battery by carefully prying it out of its socket with your fingers or with a blunt,
nonconducting object such as a plastic screwdriver.
8
Insert the new battery into the socket with the side labeled "+" facing up, and snap the
battery into place.
9
Replace the computer cover (see page 78).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
10
Connect your computer and devices to electrical outlets, and turn them on.
11
Enter system setup (see page 82) and restore the settings you recorded in step 1.
12
Properly dispose of the old battery. See the
Product Information Guide
for battery disposal
information.
battery socket
battery