Filter
Top Products
178 Configuration: Premium Feature—Virtual Disk Copy
8
In the
Select copy priority area
, select the relevant copy priority and click
Next
.
The
Confirmation
window displays the summary of your selections.
9
Ty p e
yes
and click
Finish
.
NOTE: The Operation in Progress icon is displayed on the source virtual disk and
the target virtual disk while the virtual disk copy has a status of In Progress or
Pending.
Storage Array Performance During Virtual Disk
Copy
The following factors contribute to the overall performance of the
storage array:
• I/O activity
•Virtual disk RAID level
• Virtual disk configuration—Number of drives in the virtual disk groups
• Virtual disk type—Snapshot virtual disks may take more time to copy than
standard virtual disks
During a virtual disk copy, resources for the storage array are diverted from
processing I/O activity to completing a virtual disk copy. This affects the
overall performance of the storage array. When you create a new virtual disk
copy, you define the copy priority to determine how much controller
processing time is diverted from I/O activity to a virtual disk copy operation.
Setting Copy Priority
You can use the Copy Manager to select the rate at which a virtual disk copy
completes for a selected copy pair. You can change the copy priority for a copy
pair at any of these times:
• Before the virtual disk copy begins
• While the virtual disk copy has a status of
In Progress
• When you re-create a virtual disk copy
To set copy priority:
1
In the AMW, select
Virtual Disk
Copy Manager
.
book.book Page 178 Tuesday, June 18, 2013 3:03 PM